Abgeschickt von Jens Meyer am 25 Dezember, 2002 um 17:59:19
Antwort auf: Ignition timing on a Volumex engine von Herve Dykmans am 24 Dezember, 2002 um 11:37:29:
: Hello Herve
-The two howles from the front side of the inlet and outlet camshaft pulleys must be at 0 degrees
(pistons in top position) at the two arrows .You
must check it from the front without plastic cover. To find the exact Top position it is the best way to check it with a "Messuhr" trough the
whole of spark plug of cylinder 1.
-the mark at the rear side of the inlet pulley
must be the 10degrees point , it must be round about 5mm before the top positon of the pistons
when you are looking at the maximum diameter of the pulley
-here are the correct ignition timings:
10 degrees /800 1/min
22 " /2900 "
35 " /3650 "
"Unterdruckverstellung" 15 degrees at 350mm Hg
Good luck and a happy new year. Jens